V. How ELECTRICITY works - working principle

How ELECTRICITY works - working principle

Transcript

Hey there, guys, Paul here from theengineeringmindset.com.

In this video, we are going to be looking at how electricity works. Now, this is pretty essential knowledge for any engineering, so we'll run through the basic parts of what you need to know.

So let's start at the very basics and for that, we need to take a look at the atom.

Everything, including you, is made from atoms. All the materials we use are made from atoms. The materials are just different because the construction of their atoms are slightly different.
The atoms are made from three particles, two of which are found inside the nucleus and the third particle sits outside this.
At the center of the atom, we have the nucleus. Inside the nucleus, we have the neutrons, which have no charge, and we also have the protons, which are positively charged. The neutrons and the protons are much heavier than the electrons so these will stay within the nucleus.
Surround the nucleus are different layers of orbital shells. These are like flight paths for the electrons. The electrons flow along these flight paths much like a satellite orbits our planet, except that the electrons travel at almost the speed of light.
The electrons are negatively charged and they are attracted to the positive charge of the protons.
The electrons orbit around the nucleus in these orbital shells and there are a set numbers of how many electrons can be in any one orbital shell.
The number of protons, neutrons, and electrons an atom has

Atoms which can pass electrons are called conductors and most metals are conductors.
On the other hand, atoms which do not have free electrons and so they can't pass electrons between other atoms are known as insulators. And these are things like glass and rubber.
Now, we can combine these materials to safely use electricity by having the conductor in the center, which allows electrons to move, but surround this with an insulator to restrict where they can flow to, i.e., not lead to us, which keeps us safe.

If we look inside a slice of copper cable at the free electrons surrounding the nucleus of the copper atom, you'll see that the free electrons are able to move to other atoms, but this happens randomly in any direction.
If we then connect this slice of copper cable to a closed circuit with a power source, such as a battery, then the voltage will force the electrons to move and these will then all flow in the same direction to try and get back to the other terminal of the battery.
When I say circuit, this just means the route which electrons could flow along between the two terminals, the positive and the negative, of a power source.
So we can add things into their path, like light bulbs, and this means that the electrons will have to pass through this in order to get to the other terminal. And so we can use this to create things such as light.
The circuit can either be open or closed. In a closed circuit, that means the electrons can flow around. And in an open circuit, this means that the electrons are not able to flow.
Voltage is a pushing force of electrons within a circuit. It's like pressure in a water pipe. The more pressure you have, the more water can flow. The more voltage you have, the more electrons can flow.
But what does a volt mean? Well, a volt is a joule per coulomb. And a joule is a measurement of energy or work and a coulomb is a group of flowing electrons.
We'll have a look at what a coulomb is in just a second though.
So a nine volt battery can provide nine joules of energy in the form of work or heat per group of electrons that flow from one side of the battery to the other.
In this case, the current of electrons flow from one side of the battery through the LED light bulb, which produces light, and then the electrons flow to the other side of the battery, therefore, nine joules of light and heat is produced by the light bulb.
Current is the flow of electrons. When a circuit is closed, it means electrons can flow, and when the circuit is open, no electrons will flow.
We can measure the flow of electrons just like you can measure the flow of water through a pipe. To measure the flow of electrons, we use the unit of amp. One amp means one coulomb per second and one coulomb is a group of electrons.
The group is incredibly large and is approximately six billion, 242 million, billion electrons, and that has to pass in one second for it to equal one amp. That's why electrons are grouped together and just called amps, to make it easier for engineers.

Resistance is a restriction to the flow of electrons in a circuit. The wire which carries the electrons will naturally have some resistance. The longer the wire, the greater the resistance. The thicker the wire, the lower the resistance.
Resistance to the flow of electrons is different for each material. And the temperature of the material can also change resistance to the flow of electrons.
Electrical circuits use specially designed components known as resistors to purposely restrict the flow of electrons. This is either to protect other components from too many electrons flowing through it or it can also be used to create light and heat, such as in an incandescent light bulb.
Resistance occurs when electrons collide with atoms. The amount of collisions is different from one material to another. Copper has very low collision rate, but other materials such as iron will have much more collisions.
When collisions occur, the atoms generate heat and at a certain temperature, the material will then start to produce light as well as heat, which is how the incandescent lamps work.

When a wire is wrapped in a coil, it will generate a magnetic field as the current passes through it. The cable will naturally create electromagnetic field by itself. It's just intensified by the coil.
By wrapping it in a coil, the magnetic field becomes so strong that the magnetic field starts to actually affect the electrons within the wire. But we'll look at why this occurs in a future, more advanced video.
We can increase the strength of the magnetic field simply by wrapping the coils around an iron core. We can also increase the number of turns within the coils and also we can increase the amount of current passing through the circuit.
And this is how electromagnets work and it's also the base of how induction motors work.
If you want to learn more about induction motors, we've already covered this in another video already. Just see the link on the screen now.
And when a magnetic field passes across the coil of wire, it will induce a voltage in that wire caused by an induced electromotive force, which is pushing electrons in a certain direction.
If the wire is connected in a circuit, then this electromotive force will cause a current to flow. This is the basis of how AC generators work and the electricity at your wall sockets within your home is produced in a very similar way.

Transformer, now, we can combine all of the aspects together that we've just covered and when we do so, we will see that we can use one coil to generate electricity and then we can place two other coils in very close proximity to each other but not touching, and this will create a transformer.
The transformer will induce a voltage from the first of the primary coil over into the secondary coil. And this will force electrons to flow if the coil in the secondary side has a closed circuit.
Now what's important about the transformer is that we can increase or decrease the voltage between the primary and the secondary coils simply by changing the amount of coils on either side.
Again, this is a subject all by itself so we'll cover this in a more advanced video later on.

Now, something else which I just want to briefly mention is the capacitor.
A capacitor forces positive and negative charges to separate across two plates when it is connected to a power supply. This causes a build-up or store of electrons within an electric field.
When the power supply is cut or interrupted, these charges will then be released, flow up, and meet again. This provides a power source but only for a few seconds until the charges have paired back up again.
It's slightly similar to a battery, but capacitors are very common and they're in almost every single circuit board. We'll cover this obviously in more detail in a future video. Just be aware of these.

So the last part I want to cover in this video is that there are two types of current electricity. That being alternating current, or AC, and then direct current, or DC.
Alternating current simply means that the current flows backwards and forwards in a circuit as the terminals are constantly reversed. This is a bit like the tide of the sea. It goes in and out, in and out, in and out. So there is reversing constantly.
Now, alternating current is the most common source of power and the plug sockets in your homes, in your buildings, in schools, and work places, et cetera, these will all be providing alternating current, AC.
Now, on the other hand, we've got direct current, or DC, and that simply means that the current flows directly in only one direction. It is not alternating.
This is what's provided from batteries and almost all your handheld devices are from this, as well.
So we can convert AC to DC and vice versa using power electronics. And this is how we charge and power, you know, small devices, and it's also how solar panels can be used to power our homes.
Because solar panels produce DC power and our homes need AC power. So we have to convert this for it to be usable.
So both AC and DC have pros and cons to it, but, you know, for sure we'll look at this in another later video. It's a bit more advanced. And there's also quite an interesting history behind why we use AC, DC, and the inventors behind that.
If you've got 10 minutes, I definitely recommend having a Google or a YouTube of this, too.

All right, that's it for this video. Thank you very much for watching. I hope you enjoyed this and it helped you.
If you have any questions, please leave me in the comments section below.
Also don't forget to subscribe and check out our website, theengineeringmindset.com.

Subtitle

1
00:00:04,680 --> 00:00:05,660
Hey there, guys, Paul here

2
00:00:05,660 --> 00:00:07,680
from theengineeringmindset.com.

3
00:00:07,680 --> 00:00:09,430
In this video, we are going to be looking

4
00:00:09,430 --> 00:00:11,430
at how electricity works.

5
00:00:11,430 --> 00:00:12,870
Now, this is pretty essential knowledge

6
00:00:12,870 --> 00:00:15,430
for any engineering, so we'll
run through the basic parts

7
00:00:15,430 --> 00:00:17,230
of what you need to know.

8
00:00:17,230 --> 00:00:18,970
So let's start at the very basics

9
00:00:18,970 --> 00:00:22,060
and for that, we need to
take a look at the atom.

10
00:00:22,060 --> 00:00:25,507
Everything, including
you, is made from atoms.

11
00:00:25,507 --> 00:00:28,090
All the materials we
use are made from atoms.

12
00:00:28,090 --> 00:00:29,640
The materials are just different

13
00:00:29,640 --> 00:00:32,060
because the construction of their atoms

14
00:00:32,060 --> 00:00:33,900
are slightly different.

15
00:00:33,900 --> 00:00:36,610
The atoms are made from three particles,

16
00:00:36,610 --> 00:00:39,240
two of which are found inside the nucleus

17
00:00:39,240 --> 00:00:42,640
and the third particle sits outside this.

18
00:00:42,640 --> 00:00:45,030
At the center of the
atom, we have the nucleus.

19
00:00:45,030 --> 00:00:46,950
Inside the nucleus, we have the neutrons,

20
00:00:46,950 --> 00:00:50,050
which have no charge, and
we also have the protons,

21
00:00:50,050 --> 00:00:52,090
which are positively charged.

22
00:00:52,090 --> 00:00:54,270
The neutrons and the
protons are much heavier

23
00:00:54,270 --> 00:00:57,780
than the electrons so these
will stay within the nucleus.

24
00:00:57,780 --> 00:01:01,200
Surround the nucleus are different
layers of orbital shells.

25
00:01:01,200 --> 00:01:03,700
These are like flight
paths for the electrons.

26
00:01:03,700 --> 00:01:05,740
The electrons flow
along these flight paths

27
00:01:05,740 --> 00:01:08,140
much like a satellite orbits our plant,

28
00:01:08,140 --> 00:01:09,610
except that the electrons travel

29
00:01:09,610 --> 00:01:11,830
at almost the speed of light.

30
00:01:11,830 --> 00:01:13,960
The electrons are negatively charged

31
00:01:13,960 --> 00:01:15,810
and they are attracted
to the positive charge

32
00:01:15,810 --> 00:01:17,290
of the protons.

33
00:01:17,290 --> 00:01:19,140
The electrons orbit around the nucleus

34
00:01:19,140 --> 00:01:21,740
in these orbital shells
and there are a set numbers

35
00:01:21,740 --> 00:01:25,390
of how many electrons can
be in any one orbital shell.

36
00:01:25,390 --> 00:01:29,050
The number of protons, neutrons,
and electrons an atom has

37
00:01:29,050 --> 00:01:31,210
tells us which material it is.

38
00:01:31,210 --> 00:01:33,840
Atoms hold on to their
electrons very tightly,

39
00:01:33,840 --> 00:01:35,930
but some materials will
hold on to them more tightly

40
00:01:35,930 --> 00:01:37,090
than others.

41
00:01:37,090 --> 00:01:39,600
The outer-most shell is
known as the valence shell,

42
00:01:39,600 --> 00:01:40,720
and in this shell,

43
00:01:40,720 --> 00:01:43,280
some materials have
loosely bound electrons

44
00:01:43,280 --> 00:01:45,640
which can flow to other atoms.

45
00:01:45,640 --> 00:01:48,860
Atoms which can pass electrons
are called conductors

46
00:01:48,860 --> 00:01:51,020
and most metals are conductors.

47
00:01:51,020 --> 00:01:53,860
On the other hand, atoms which
do not have free electrons

48
00:01:53,860 --> 00:01:56,960
and so they can't pass
electrons between other atoms

49
00:01:56,960 --> 00:01:58,410
are known as insulators.

50
00:01:58,410 --> 00:02:00,930
And these are things
like glass and rubber.

51
00:02:00,930 --> 00:02:02,370
Now, we can combine these materials

52
00:02:02,370 --> 00:02:04,210
to safely use electricity

53
00:02:04,210 --> 00:02:06,390
by having the conductor in the center,

54
00:02:06,390 --> 00:02:08,430
which allows electrons to move,

55
00:02:08,430 --> 00:02:10,090
but surround this with an insulator

56
00:02:10,090 --> 00:02:12,140
to restrict where they can flow to,

57
00:02:12,140 --> 00:02:15,210
i.e., not lead to us, which keeps us safe.

58
00:02:15,210 --> 00:02:17,180
If we look inside a slice of copper cable

59
00:02:17,180 --> 00:02:19,640
at the free electrons
surrounding the nucleus

60
00:02:19,640 --> 00:02:22,580
of the copper atom, you'll
see that the free electrons

61
00:02:22,580 --> 00:02:24,740
are able to move to other atoms,

62
00:02:24,740 --> 00:02:27,820
but this happens randomly
in any direction.

63
00:02:27,820 --> 00:02:29,870
If we then connect this
slice of copper cable

64
00:02:29,870 --> 00:02:31,970
to a closed circuit with a power source,

65
00:02:31,970 --> 00:02:35,130
such as a battery, then the
voltage will force the electrons

66
00:02:35,130 --> 00:02:36,960
to move and these will then all flow

67
00:02:36,960 --> 00:02:38,840
in the same direction to try and get back

68
00:02:38,840 --> 00:02:41,550
to the other terminal of the battery.

69
00:02:41,550 --> 00:02:43,580
When I say circuit,
this just means the road

70
00:02:43,580 --> 00:02:45,430
which electrons could flow along

71
00:02:45,430 --> 00:02:48,240
between the two terminals,
the positive and the negative,

72
00:02:48,240 --> 00:02:49,890
of a power source.

73
00:02:49,890 --> 00:02:51,700
So we can add things into their path,

74
00:02:51,700 --> 00:02:53,903
like light bulbs, and this
means that the electrons

75
00:02:53,903 --> 00:02:56,410
will have to pass through
this in order to get

76
00:02:56,410 --> 00:02:57,730
to the other terminal.

77
00:02:57,730 --> 00:03:00,730
And so we can use this to
create things such as light.

78
00:03:00,730 --> 00:03:02,750
The circuit can either be open or closed.

79
00:03:02,750 --> 00:03:04,900
In a closed circuit,
that means the electrons

80
00:03:04,900 --> 00:03:05,960
can flow around.

81
00:03:05,960 --> 00:03:08,320
And in an open circuit, this
means that the electrons

82
00:03:08,320 --> 00:03:10,140
are not able to flow.

83
00:03:10,140 --> 00:03:13,790
Voltage is a pushing force of
electrons within a circuit.

84
00:03:13,790 --> 00:03:15,770
It's like pressure in a water pipe.

85
00:03:15,770 --> 00:03:18,400
The more pressure you have,
the more water can flow.

86
00:03:18,400 --> 00:03:21,630
The more voltage you have,
the more electrons can flow.

87
00:03:21,630 --> 00:03:23,300
But what does a volt mean?

88
00:03:23,300 --> 00:03:26,000
Well, a volt is a joule per coulomb.

89
00:03:26,000 --> 00:03:28,850
And a joule is a measurement
of energy or work

90
00:03:28,850 --> 00:03:31,800
and a coulomb is a group
of flowing electrons.

91
00:03:31,800 --> 00:03:33,120
We'll have a look at what a coulomb is

92
00:03:33,120 --> 00:03:34,940
in just a second though.

93
00:03:34,940 --> 00:03:37,810
So a nine volt battery
can provide nine joules

94
00:03:37,810 --> 00:03:40,350
of energy in the form of work or heat

95
00:03:40,350 --> 00:03:42,150
per group of electrons that flow

96
00:03:42,150 --> 00:03:44,710
from one side of the battery to the other.

97
00:03:44,710 --> 00:03:46,890
In this case, the current of electrons

98
00:03:46,890 --> 00:03:48,510
flow from one side of the battery

99
00:03:48,510 --> 00:03:51,800
through the LED light
bulb, which produces light,

100
00:03:51,800 --> 00:03:53,760
and then the electrons
flow to the other side

101
00:03:53,760 --> 00:03:56,810
of the battery, therefore,
nine joules of light

102
00:03:56,810 --> 00:03:59,850
and heat is produced by the light bulb.

103
00:03:59,850 --> 00:04:01,940
Current is the flow of electrons.

104
00:04:01,940 --> 00:04:03,120
When a circuit is closed,

105
00:04:03,120 --> 00:04:06,100
it means electrons can flow,
and when the circuit is open,

106
00:04:06,100 --> 00:04:07,990
no electrons will flow.

107
00:04:07,990 --> 00:04:09,530
We can measure the flow of electrons

108
00:04:09,530 --> 00:04:12,540
just like you can measure the
flow of water through a pipe.

109
00:04:12,540 --> 00:04:13,950
To measure the flow of electrons,

110
00:04:13,950 --> 00:04:16,070
we use the unit of amp.

111
00:04:16,070 --> 00:04:18,160
One amp means one coulomb per second

112
00:04:18,160 --> 00:04:21,230
and one coulomb is a group of electrons.

113
00:04:21,230 --> 00:04:23,920
The group is incredibly
large and is approximately

114
00:04:23,920 --> 00:04:28,390
six billion, 242 million,
billion electrons,

115
00:04:28,390 --> 00:04:30,770
and that has to pass in one second

116
00:04:30,770 --> 00:04:33,130
for it to equal one amp.

117
00:04:33,130 --> 00:04:34,670
That's why electrons are grouped together

118
00:04:34,670 --> 00:04:37,560
and just called amps, to
make it easier for engineers.

119
00:04:37,560 --> 00:04:40,720
Resistance is a restriction
to the flow of electrons

120
00:04:40,720 --> 00:04:41,980
in a circuit.

121
00:04:41,980 --> 00:04:43,440
The wire which carries the electrons

122
00:04:43,440 --> 00:04:45,580
will naturally have some resistance.

123
00:04:45,580 --> 00:04:47,930
The longer the wire, the
greater the resistance.

124
00:04:47,930 --> 00:04:50,640
The thicker the wire,
the lower the resistance.

125
00:04:50,640 --> 00:04:52,270
Resistance to the flow of electrons

126
00:04:52,270 --> 00:04:54,240
is different for each material.

127
00:04:54,240 --> 00:04:55,860
And the temperature of the material

128
00:04:55,860 --> 00:04:59,490
can also change resistance
to the flow of electrons.

129
00:04:59,490 --> 00:05:02,420
Electrical circuits use
specially designed components

130
00:05:02,420 --> 00:05:05,430
known as resistors to
purposely restrict the flow

131
00:05:05,430 --> 00:05:06,770
of electrons.

132
00:05:06,770 --> 00:05:08,930
This is either to protect other components

133
00:05:08,930 --> 00:05:10,940
from too many electrons flowing through it

134
00:05:10,940 --> 00:05:13,830
or it can also be used
to create light and heat,

135
00:05:13,830 --> 00:05:15,793
such as in an incandescent light bulb.

136
00:05:16,700 --> 00:05:20,210
Resistance occurs when
electrons collide with atoms.

137
00:05:20,210 --> 00:05:22,760
The amount of collisions is
different from one material

138
00:05:22,760 --> 00:05:23,740
to another.

139
00:05:23,740 --> 00:05:25,870
Copper has very low collision rate,

140
00:05:25,870 --> 00:05:27,750
but other materials such as iron

141
00:05:27,750 --> 00:05:29,940
will have much more collisions.

142
00:05:29,940 --> 00:05:32,560
When collisions occur,
the atoms generate heat

143
00:05:32,560 --> 00:05:33,780
and at a certain temperature,

144
00:05:33,780 --> 00:05:36,320
the material will then
start to produce light

145
00:05:36,320 --> 00:05:40,120
as well as heat, which is how
the incandescent lamps work.

146
00:05:40,120 --> 00:05:41,650
When a wire is wrapped in a coil,

147
00:05:41,650 --> 00:05:43,310
it will generate a magnetic field

148
00:05:43,310 --> 00:05:45,430
as the current passes through it.

149
00:05:45,430 --> 00:05:47,990
The cable will naturally
create electromagnetic field

150
00:05:47,990 --> 00:05:49,010
by itself.

151
00:05:49,010 --> 00:05:50,983
It's just intensified by the coil.

152
00:05:51,820 --> 00:05:53,200
By wrapping it in a coil,

153
00:05:53,200 --> 00:05:55,430
the magnetic field becomes so strong

154
00:05:55,430 --> 00:05:57,040
that the magnetic field starts to actually

155
00:05:57,040 --> 00:05:59,710
affect the electrons within the wire.

156
00:05:59,710 --> 00:06:01,050
But we'll look at why this occurs

157
00:06:01,050 --> 00:06:03,390
in a future, more advanced video.

158
00:06:03,390 --> 00:06:05,750
We can increase the strength
of the magnetic field

159
00:06:05,750 --> 00:06:08,950
simply by wrapping the
coils around an iron core.

160
00:06:08,950 --> 00:06:11,870
We can also increase the number
of turns within the coils

161
00:06:11,870 --> 00:06:13,800
and also we can increase
the amount of current

162
00:06:13,800 --> 00:06:15,200
passing through the circuit.

163
00:06:16,116 --> 00:06:17,750
And this is how electromagnets work

164
00:06:17,750 --> 00:06:21,040
and it's also the base of
how induction motors work.

165
00:06:21,040 --> 00:06:22,930
If you want to learn more
about induction motors,

166
00:06:22,930 --> 00:06:25,310
we've already covered this
in another video already.

167
00:06:25,310 --> 00:06:27,460
Just see the link on the screen now.

168
00:06:27,460 --> 00:06:30,820
And when a magnetic field
passes across the coil of wire,

169
00:06:30,820 --> 00:06:33,190
it will induce a voltage in that wire

170
00:06:33,190 --> 00:06:36,030
caused by an induced electromotive force,

171
00:06:36,030 --> 00:06:39,170
which is pushing electrons
in a certain direction.

172
00:06:39,170 --> 00:06:41,393
If the wire is connected in a circuit,

173
00:06:41,393 --> 00:06:44,740
then this electromotive force
will cause a current to flow.

174
00:06:44,740 --> 00:06:47,430
This is the basis of
how AC generators work

175
00:06:47,430 --> 00:06:50,160
and the electricity at your
wall sockets within your home

176
00:06:50,160 --> 00:06:52,810
is produced in a very similar way.

177
00:06:52,810 --> 00:06:55,890
Transformer, now, we can
combine all of the aspects

178
00:06:55,890 --> 00:06:57,520
together that we've just covered

179
00:06:57,520 --> 00:07:00,090
and when we do so, we will
see that we can use one coil

180
00:07:00,090 --> 00:07:02,020
to generate electricity

181
00:07:02,020 --> 00:07:03,700
and then we can place two other coils

182
00:07:03,700 --> 00:07:07,110
in very close proximity to
each other but not touching,

183
00:07:07,110 --> 00:07:09,370
and this will create a transformer.

184
00:07:09,370 --> 00:07:11,220
The transformer will induce a voltage

185
00:07:11,220 --> 00:07:13,420
from the first of the primary coil

186
00:07:13,420 --> 00:07:15,240
over into the secondary coil.

187
00:07:15,240 --> 00:07:17,530
And this will force electrons to flow

188
00:07:17,530 --> 00:07:20,160
if the coil in the secondary side

189
00:07:20,160 --> 00:07:22,100
has a closed circuit.

190
00:07:22,100 --> 00:07:23,940
Now what's important about the transformer

191
00:07:23,940 --> 00:07:26,850
is that we can increase
or decrease the voltage

192
00:07:26,850 --> 00:07:29,250
between the primary
and the secondary coils

193
00:07:29,250 --> 00:07:32,880
simply by changing the amount
of coils on either side.

194
00:07:32,880 --> 00:07:35,510
Again, this is a subject all by itself

195
00:07:35,510 --> 00:07:39,170
so we'll cover this in a
more advanced video later on.

196
00:07:39,170 --> 00:07:41,630
Now, something else which I
just want to briefly mention

197
00:07:41,630 --> 00:07:43,010
is the capacitor.

198
00:07:43,010 --> 00:07:46,130
So, a capacitor forces
positive and negative charges

199
00:07:46,130 --> 00:07:48,150
to separate across two plates

200
00:07:48,150 --> 00:07:50,570
when it is connected to a power supply.

201
00:07:50,570 --> 00:07:52,830
This causes a build-up
or store of electrons

202
00:07:52,830 --> 00:07:54,680
within an electric field.

203
00:07:54,680 --> 00:07:57,100
When the power supply
is cut or interrupted,

204
00:07:57,100 --> 00:07:58,750
these charges will then be released,

205
00:07:58,750 --> 00:08:00,720
flow up, and meet again.

206
00:08:00,720 --> 00:08:03,690
This provides a power source
but only for a few seconds

207
00:08:03,690 --> 00:08:06,620
until the charges have
paired back up again.

208
00:08:06,620 --> 00:08:08,210
It's slightly similar to a battery,

209
00:08:08,210 --> 00:08:10,390
but capacitors are very common

210
00:08:10,390 --> 00:08:13,070
and they're in almost
every single circuit board.

211
00:08:13,070 --> 00:08:14,990
We'll cover this obviously in more detail

212
00:08:14,990 --> 00:08:15,830
in a future video.

213
00:08:15,830 --> 00:08:17,520
Just be aware of these.

214
00:08:17,520 --> 00:08:20,090
So the last part I want
to cover in this video

215
00:08:20,090 --> 00:08:23,730
is that there are two types
of current electricity.

216
00:08:23,730 --> 00:08:26,800
That being alternating current, or AC,

217
00:08:26,800 --> 00:08:29,430
and then direct current, or DC.

218
00:08:29,430 --> 00:08:31,180
Alternating current simply means

219
00:08:31,180 --> 00:08:33,520
that the current flows
backwards and forwards

220
00:08:33,520 --> 00:08:37,810
in a circuit as the terminals
are constantly reversed.

221
00:08:37,810 --> 00:08:39,910
This is a bit like the tide of the sea.

222
00:08:39,910 --> 00:08:41,470
It goes in and out, in
and out, in and out.

223
00:08:41,470 --> 00:08:43,163
So there is reversing constantly.

224
00:08:44,740 --> 00:08:47,280
Now, alternating current
is the most common source

225
00:08:47,280 --> 00:08:50,040
of power and the plug
sockets in your homes,

226
00:08:50,040 --> 00:08:53,320
in your buildings, in schools,
and work places, et cetera,

227
00:08:53,320 --> 00:08:56,763
these will all be providing
alternating current, AC.

228
00:08:57,960 --> 00:09:01,240
Now, on the other hand, we've
got direct current, or DC,

229
00:09:01,240 --> 00:09:03,180
and that simply means
that the current flows

230
00:09:03,180 --> 00:09:06,300
directly in only one direction.

231
00:09:06,300 --> 00:09:08,080
It is not alternating.

232
00:09:08,080 --> 00:09:10,100
This is what's provided from batteries

233
00:09:10,100 --> 00:09:12,270
and almost all your handheld devices

234
00:09:12,270 --> 00:09:14,360
are from this, as well.

235
00:09:14,360 --> 00:09:17,970
So we can convert AC to DC and vice versa

236
00:09:17,970 --> 00:09:19,630
using power electronics.

237
00:09:19,630 --> 00:09:21,720
And this is how we charge and power,

238
00:09:21,720 --> 00:09:23,710
you know, small devices,

239
00:09:23,710 --> 00:09:26,370
and it's also how solar panels can be used

240
00:09:26,370 --> 00:09:27,300
to power our homes.

241
00:09:27,300 --> 00:09:30,290
Because solar panels produce DC power

242
00:09:30,290 --> 00:09:32,680
and our homes need AC power.

243
00:09:32,680 --> 00:09:35,203
So we have to convert
this for it to be usable.

244
00:09:36,210 --> 00:09:40,180
So both AC and DC have
pros and cons to it,

245
00:09:40,180 --> 00:09:42,110
but, you know, for sure we'll look at this

246
00:09:42,110 --> 00:09:43,130
in another later video.

247
00:09:43,130 --> 00:09:44,740
It's a bit more advanced.

248
00:09:44,740 --> 00:09:46,390
And there's also quite
an interesting history

249
00:09:46,390 --> 00:09:50,713
behind why we use AC, DC, and
the inventors behind that.

250
00:09:51,770 --> 00:09:53,840
If you've got 10 minutes,
I definitely recommend

251
00:09:53,840 --> 00:09:58,010
having a Google or a YouTube of this, too.

252
00:09:58,010 --> 00:09:59,260
All right, that's it for this video.

253
00:09:59,260 --> 00:10:00,520
Thank you very much for watching.

254
00:10:00,520 --> 00:10:02,430
I hope you enjoyed this and it helped you.

255
00:10:02,430 --> 00:10:03,540
If you have any questions,

256
00:10:03,540 --> 00:10:05,790
please leave me in the
comments section below.

257
00:10:05,790 --> 00:10:08,710
Also don't forget to subscribe
and check out our website,

258
00:10:08,710 --> 00:10:10,243
theengineeringmindset.com.